Quick Answer: When Should You Shock Your Well?

Will Shocking well get rid of sulfur smell?


Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors.

Often keeps odors away for 1 – 2 months.


How often should I clean my well?

Yet, the truth is that water quality and water supply can change frequently. After the first well drilling, you should have your water quality checked annually. Set a specific date on a calendar, or better yet, have a professional like Kaufman Well Drilling set your annual appointments for you ahead of time.

What happens if my well fails inspection?

In addition to sterilizing the well, an owner/seller or the new owner of a well that has failed a water test more than once in succession should: … install water treatment/sterilization equipment such as a chlorinator/charcoal filter system or an ultra-violet light system. These systems work but require maintenance.

How long should you wait to use water after you chlorinate a well?

Use your reserves of fresh water for all purposes. Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.

How much does it cost to have a well Shocked?

The cost ranges from $80 – $200. You can also perform the task yourself. It simply consists of pouring diluted chlorine into the water, letting it sit for a while, and then flushing the chlorine out of the system. You do this by making preparations, adding the chlorine bleach, and disinfecting the well.

How long does it take to smell bleach when shocking a well?

It can take 30 minutes to 24 hours or more to flush all of the chlorine from the well. ►Once the chlorine is gone from the well, open up each fixture one at a time until the chlorine smell is no longer present.

How much does it cost to have a well cleaned?

Well Drilling Cost Drilling a well costs $5,500 for an average depth of 150 feet. Most projects range between $1,500 and $12,000. Expect to pay between $15 and $30 per foot of depth, or up to $50 for difficult terrain.

Can I pour bleach down my well?

Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. … Pour it into the well without pumping.

How often should you add bleach to your well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

When can I shower after shocking well?

Before you chlorinate your well, there are a number of precautions and steps to take to ensure safety for your family. Keep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea.

Can I pour hydrogen peroxide in my well?

Hydrogen peroxide well water treatment for bacteria may not be as popular as other options for the treatment of bacteria-infested well water, but it is just as effective as, say, chlorination or shock treatment and, according to experts, is in fact safer.

Should you chlorinate your well?

If you have performed a water test that has come back positive for coliform bacteria, then it’s time to chlorinate you well. If you haven’t tested your well in a few years, it’s a good idea to test your water. But homeowners often wait until signs of a problem surface before testing their water.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

Can I put chlorine tablets in my well?

Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well. Don’t use stabilized swimming pool chlorine products or non-chlorinated “pool shock” products, as they are not effective enough to clean your drinking water.

What happens if you drink water with too much chlorine?

Chlorine poisoning can cause symptoms throughout your body. Respiratory symptoms include coughing, difficulty breathing, and fluid inside the lungs. Digestive system symptoms include: burning in the mouth.

Is it safe to drink water that smells like chlorine?

The smell of bleach in your tap water is likely caused by high levels of chlorine. Small traces of chlorine in your water is not harmful. It is actually required by the EPA (Environmental Protection Agency) in order to disinfect water before it is distributed to homes and offices.

How long does it take for water to clear after shocking a well?

4 to 8 hoursIt will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing. Caution: The chlorine must be completely flushed from plumbing system.

What do I do if I put too much bleach in my well?

Just dumping the bleach in won’t fix your problem though. Assuming you have a spigot at the top of the well head, pour the bleach down the well and then run a hose from the spigot back down the well. This will push the bleach all the way from the top of the water column to the bottom.

How long does it take for a well to clear up?

between 1 and 2 weeksAll in all, with all steps considered, it will typically take between 1 and 2 weeks to have a new well completely up and running. Of course, depending on several factors, it could take shorter or longer than this.